This record describes the End of Voyage (EOV) data archive from the Marine National Facility (MNF) RV Investigator voyage IN2023_T01, titled "Transit Sydney-Hobart." The voyage took place between November 2, 2023 and November 5, 2023 (AEST), departing from Sydney and returning to Hobart. For further information please refer to the voyage documentation links. Instruments used and data collected include: Regular measurements: Greenhouse Gas Analysers (Picarro), Cloud Condensation Nuclei counter (CCN), Condensation Particle Counters (CPC), Disdrometer, Radon sensor, Scanning Mobility Particle Sizers (SMPS), Multibeam Echosounder (EM710, EM122), Sub-bottom Profiler (SBP120), GPS Positioning System, Doppler Velocity Log, Thermosalinographs (TSG), Fluorometer, Oxygen Optode, pCO2, Multiangle Absorption Photometer (MAAP), Ozone Sensor, Nephelometer, Atmospheric Temperature, Humidity, Pressure, Wind and Rain sensors, Photosynthetically Active Radiation (PAR) sensor, Precision Infrared Radiometer (PIR), Precision Spectral Pyranometer (PSP), Starboard and Portside Radiometers, Air Sampler, Weather Radar. The archive for the IN2023_T01 EOV raw data is curated by the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC) in Hobart, with a permanent archive at the CSIRO Data Access Portal (https://data.csiro.au/), providing access to voyage participants and processors of the data collected on the voyage. All voyage documentation is available electronically to MNF support via the local network. Applications to access voyage documentation by non-CSIRO participants can be made via data-requests-hf@csiro.au. All processed data from this voyage are made publicly available through the MNF Data Trawler (in the related links).

This record describes the End of Voyage (EOV) archive from the Marine National Facility (MNF) RV Investigator research voyage IN2018_V08, titled "The Balleny mantle plume: key role in Tasmania-Antarctic breakup?" The voyage took place from Hobart (TAS) to Hobart between December 27, 2018 and January 10, 2019. For further information refer to the Voyage documentation links below. Instruments used and data collected include: Regular measurements: Acoustic Doppler Current Profiler (ADCP; 75, 150 KHz ), Fisheries echosounder (EK60), Multibeam Echosounder (EM710, EM122), Sub-bottom Profiler (SBP120), Gravimeter, GPS Positioning System, Doppler Velocity Log, Met station (temp, humidity, pressure, wind, rain, PIR, PSP, PAR), Nephelometer, pCO2, Starboard and Portside Radiometers, Radon, Ozone and Oxygen sensors, Weather Radar, Greenhouse Gas Analysers (Aerodyne, Picarro), Air Pressure, Wind Speed and Direction sensors, Photosynthetically Active Radiation (PAR) sensor, Precision Infrared Radiometer (PIR), Precision Spectral Pyranometer (PSP), Infrared Sea Surface Temperature Autonomous Radiometer (ISAR), Seawater (TSG, fluorometer, optode), Thermosalinographs (TSG), Expendable Bathythermographs (XBTs). Voyage-specific measurements: Condensation Particle Counters (CPC), Cloud Condensation Nuclei counter (CCN), Multiangle Absorption Photometer (MAAP), Scanning Mobility Particle Sizers (SMPS), Rock Dredge. The archive for the IN2018_V08 EOV raw data is curated by the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart, with a permanent archive at the CSIRO Data Access Portal (DAP, https://data.csiro.au/dap/), providing access to participants and processors of the data collected in the voyage. All voyage documentation is available electronically to MNF support via the local network. Access to voyage documentation for non-CSIRO participants can be made via DataLibrariansOAMNF@csiro.au.

This record describes the End of Voyage (EOV) archive from the Marine National Facility (MNF) RV Investigator research voyage in2017_t01, titled "Natural iron fertilisation of oceans around Australia: linking terrestrial dust and bushfires to marine biogeochemistry." The voyage took place from Sydney (NSW) to Broome (WA) between September 24 and October 8, 2017. For further information refer to the Voyage documentation links below. Instruments used and data collected include: Regular measurements: Acoustic Doppler Current Profiler (ADCP; 75 KHz ), Fisheries echosounder (EK60, ME70), Multibeam Echosounder (EM710, EM122), Sub-bottom Profiler (SBP120), GPS Positioning System, Doppler Velocity Log, pCO2, Starboard and Portside Radiometers, Radon, Ozone, Weather Radar, Greenhouse Gas Analysers (Aerodyne, Picarro), Air Pressure, Wind Speed and Direction sensors, Photosynthetically Active Radiation (PAR) sensor, Thermosalinographs. Voyage-specific measurements: Cloud Condensation Nuclei counter (CCN, ccnc), Condensation Particle Counters (CPC), Disdrometer, Scanning Mobility Particle Sizers (SMPS), Infrared Sea Surface Temperature Autonomous Radiometer (ISAR), Multiangle Absorption Photometer (MAAP), Nephelometer, Ultra Short BaseLine Underwater Positioning System (USBL), Corer, Trace Metal Sampling, Video. The archive for the IN2017_T01 EOV raw data is curated by the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart, with a permanent archive at the CSIRO Data Access Portal (DAP, https://data.csiro.au/dap/), providing access to participants and processors of the data collected in the voyage. All voyage documentation is available electronically to MNF support via the local network. Access to voyage documentation for non-CSIRO participants can be made via DataLibrariansOAMNF@csiro.au.

This record describes the End of Voyage (EOV) archive from the Marine National Facility (MNF) RV Investigator research voyage in2018_e01, titled "MNF sea trials." The voyage took place from Hobart (TAS) to Hobart between June 9 and June 12, 2018. For further information refer to the Voyage documentation links below. Instruments used and data collected include: Regular measurements: Acoustic Doppler Current Profiler (ADCP; 75, 150 KHz ), Disdrometer, Fisheries echosounder (EK60), Multibeam Echosounder (EM710), GPS Positioning System, Doppler Velocity Log, Met station (temp, humidity, pressure, wind, rain, PIR, PSP, PAR), Nephelometer, pCO2, Starboard and Portside Radiometers, Radon and Ozone sensors, Air Pressure, Wind Speed and Direction sensors, Photosynthetically Active Radiation (PAR) sensor, Precision Infrared Radiometer (PIR), Precision Spectral Pyranometer (PSP), Infrared Sea Surface Temperature Autonomous Radiometer (ISAR), Seawater (TSG, fluorometer, optode), Thermosalinographs (TSG). Voyage-specific measurements: Condensation Particle Counters (CPC), Cloud Condensation Nuclei counter (CCN), Scanning Mobility Particle Sizers (SMPS), Triaxus. The archive for the IN2018_E01 EOV raw data is curated by the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart, with a permanent archive at the CSIRO Data Access Portal (DAP, https://data.csiro.au/dap/), providing access to participants and processors of the data collected in the voyage. All voyage documentation is available electronically to MNF support via the local network. Access to voyage documentation for non-CSIRO participants can be made via DataLibrariansOAMNF@csiro.au.

This record describes the End of Voyage (EOV) archive from the Marine National Facility (MNF) RV Investigator research voyage in2018_c01, titled "RAN Hydrographic Survey." The voyage took place from Hobart (TAS) to Hobart between May 28 and June 8, 2018. For further information refer to the Voyage documentation links below. Instruments used and data collected include: Regular measurements: Acoustic Doppler Current Profiler (ADCP; 75, 150 KHz ), Disdrometer, Multibeam Echosounder (EM710), Sub-bottom Profiler (SBP120), Gravimeter, GPS Positioning System, Doppler Velocity Log, Met station (temp, humidity, pressure, wind, rain, PIR, PSP, PAR), Nephelometer, pCO2, Starboard and Portside Radiometers, Radon and Ozone sensors, Weather Radar, Greenhouse Gas Analysers (Picarro), Air Pressure, Wind Speed and Direction sensors, Photosynthetically Active Radiation (PAR) sensor, Infrared Sea Surface Temperature Autonomous Radiometer (ISAR), Seawater (TSG, fluorometer, optode), Thermosalinographs. Voyage-specific measurements: Condensation Particle Counters (CPC), Cloud Condensation Nuclei counter (CCN), Hydrophones, Multiangle Absorption Photometer (MAAP), Multibeam Echosounder (EM2040C), Scanning Mobility Particle Sizers (SMPS), Sound Velocity Profile (SVP). The archive for the IN2018_C01 EOV raw data is curated by the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart, with a permanent archive at the CSIRO Data Access Portal (DAP, https://data.csiro.au/dap/), providing access to participants and processors of the data collected in the voyage. All voyage documentation is available electronically to MNF support via the local network. Access to voyage documentation for non-CSIRO participants can be made via DataLibrariansOAMNF@csiro.au.

This record describes the End of Voyage (EOV) archive from the Marine National Facility (MNF) RV Investigator research voyage in2016_v04, titled "Influence of temperature and nutrient supply on the biogeochemical function and diversity of ocean microbes." The voyage took place from Sydney (NSW) to Brisbane (QLD) between August 31 and September 22, 2016. Main project: Influence of temperature and nutrient supply on the biogeochemical function and diversity of ocean microbes. Supplementary project: Natural iron fertilisation of oceans around Australia: Linking terrestrial dust and bushfires to marine biogeochemistry. For further information about these projects please refer to the Voyage Plan and Voyage Summary. Data collected include: Regular measurements: Acoustic Doppler Current Profiler (ADCP; 75, 150 KHz ), Fisheries Echosounder (EK60), Multibeam Echosounder (EM710, EM122), Sub-bottom Profiler (SBP120), GPS Positioning System, Doppler Velocity Log, Radiometers, Pyranometers, Radon, Weather Radar, Greenhouse gas analysers (Aerodyne, Picarro), Air Pressure, Wind Speed and Direction, Photosynthetically Active Radiation (PAR), Ozone, Thermosalinographs, CTD, Expendable Bathythermographs (XBTs). Voyage Specific measurements: Condensation Particle Counters (CPC), Cloud Condensation Nuclei Counter (CCN, ccnc), Gravity Meter, pCO2, Hydrochemistry, Scanning Mobility Particle Sizers (SMPS), PAM fluorometer, Dissolved Inorganic Carbon (DIC), EZnet, Triaxus. The archive for the IN2016_V04 EOV raw data is curated by the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart, with a permanent archive at the CSIRO Data Access Portal (DAP, https://data.csiro.au/dap/), providing access to participants and processors of the data collected in the MNF RV Investigator IN2016_V04 voyage.

This record describes the End of Voyage archive from the Marine National Facility (MNF) RV Investigator voyage IN2015_V01 titled "IMOS Southern Ocean Time Series Automated Moorings for Climate and Carbon Cycle Studies Southwest of Tasmania". This was the first research voyage for the RV Investigator. The voyage took place between the 21st and the 30th of March, 2015 (local time) departing from Hobart and sailing to the south-west of Tasmania (47 S, 142 E) and returning to Hobart. Routine data collected included Acoustic Doppler Current Profiler (ADCP) (75, 150 KHz), Underway (UWY), SST Radiometer, CTD, Hydrology, Atmospheric data including aerosol properties, particulates and composition, ozone and radon, Greenhouse gases data, Underway pCO2, Echosounders (38, 70, 120, 200, 333 KHz), Multibeam (EM122, EM710, ME70 and SBP120) and XBT. Additional atmospheric instruments used on this voyage included two Condensation Particle Counters (CPC), Time of Flight Aerosol Chemical Speciation Monitor (ToF-ACSM), Cloud Radar BASTA 95GHz, Cloud Condensation Nuclei Counter (CCN), Long Scanning Mobility Particle Size (longSMPS), Nano Scanning Mobility Particle Size (nanoSMPS), Old Scanning Mobility Particle Size (Old SMPS), Neutral Cluster Air Ion Spectrometer (NAIS), Proton Transfer Reaction Mass Spectrometer (PTR-MS), Volatile Organic Chemical Sequencer (VOC) and Mercury Vapour Analyser (Tekran unit). Three CTD casts to 2250m with temperature, salinity, oxygen, phytoplankton fluorescence, particle backscatter, and beam attenuation sensors were sampled at 24 depths for the analyses of nutrients, salinity, Dissolved Inorganic Carbon (DIC), alkalinity and dissolved oxygen. The top 6 depths (to 150m) were also analysed for particulate organic carbon and pigments. Additional underway samples were collected for particulate organic carbon, biogenic silica, spectroscopic and pigment analyses. The towed undulating CTD (TRIAXUS) with the ECO Triplet optical sensor, Laser Optical Plankton Counter (LOPC) and the newly mounted Submersible Ultraviolet Nitrate Analyser (SUNA) and Fluorescence Induction and Relaxation (FIRe) instruments was deployed. The SAZ-16 sediment trap mooring deployed in May 2013 was recovered. Three moorings for recovery in April 2016 were deployed: SOFS-5 air-sea flux, Pulse-11 biogeochemistry and the SAZ-17 sediment trap mooring. Three profiling floats were deployed: the Argo Hull 638i and Southern Ocean Carbon Cycling Observations and Modeling (SOCCOM) ID8514 and ID9315. The EOV paper documentation - Multibeam (EM122, EM710 and ME70 and SBP120), CTD and XBT logs were scanned, archived and entered in the records management system TRIM, reference "in2015_V01". ELOG files were generated as csv formatted files and archived. The TRIAXUS log book entries have been scanned and archived. All voyage documentation is archived c/o the Data Centre in Hobart available electronically to MNF support via the local network folder "global_docs". Access to voyage documentation for non CSIRO participants can be made via DataLibrariansOAMNF@csiro.au. The archive for the IN2015_V01 EOV data will be held temporarily within the CSIRO Oceans and Atmosphere Data Centre in Hobart, with a permanent archive to be located at the CSIRO Data Access Portal (DAP), providing access to participants and processors of the data collected on the Marine National Facility RV Investigator IN2015_V01.

This record describes the End of Voyage (EOV) data archive from the Marine National Facility (MNF) RV Investigator voyage IN2021_E04, titled "Trials & Calibrations." The voyage took place between December 15, 2021 and December 20, 2021 (AEST), departing from Hobart and returning to Hobart. For further information please refer to the voyage documentation links. Instruments used and data collected include: Regular measurements: Acoustic Doppler Current Profiler (ADCP; 75, 150 KHz ), Greenhouse Gas Analysers (Picarro), Cloud Condensation Nuclei counter (CCN), Disdrometer, Radon sensor, Scanning Mobility Particle Sizers (SMPS), Fisheries Echosounder (EK80), Multibeam Echosounder (EM710, EM122), Sub-bottom Profiler (SBP120), GPS Positioning System, Doppler Velocity Log, Thermosalinographs (TSG), Fluorometer, Oxygen Optode, pCO2, Gravimeter, Multiangle Absorption Photometer (MAAP), Ozone Sensor, Nephelometer, Atmospheric Temperature, Humidity, Pressure, Wind and Rain sensors, Photosynthetically Active Radiation (PAR) sensor, Precision Infrared Radiometer (PIR), Precision Spectral Pyranometer (PSP), Starboard and Portside Radiometers, Air Sampler, Weather Radar. Voyage-specific measurements: Autonomous Surface Vehicle CO2 sensor (ASVCO2), Hydrophones, Seismic, Triaxus. The archive for the IN2021_E04 EOV raw data is curated by the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC) in Hobart, with a permanent archive at the CSIRO Data Access Portal (DAP, https://data.csiro.au/dap/), providing access to voyage participants and processors of the data collected on the voyage. All voyage documentation is available electronically to MNF support via the local network. Access to voyage documentation for non-CSIRO participants can be made via NCMI_DataLibrarians@csiro.au.

This record describes the End of Voyage (EOV) data archive from the Marine National Facility (MNF) RV Investigator voyage IN2021_E03, titled "Equipment Trials and Calibrations 2021." The voyage took place between December 1 and December 8, 2021 (AEST), departing from Hobart (TAS) and returning to Hobart. For further information please refer to the voyage documentation links. Instruments used and data collected include: Regular measurements: Acoustic Doppler Current Profiler (ADCP; 75, 150 KHz ), Greenhouse Gas Analysers (Picarro), Condensation Particle Counters (CPC), Disdrometer, Scanning Mobility Particle Sizers (SMPS), Fisheries Echosounder (EK80), Multibeam Echosounder (EM710, EM122), Sub-bottom Profiler (SBP120), GPS Positioning System, Doppler Velocity Log, Thermosalinographs (TSG), Fluorometer, Oxygen Optode, pCO2, Gravimeter, Ozone Sensor, Atmospheric Temperature, Humidity, Pressure, Wind and Rain sensors, Photosynthetically Active Radiation (PAR) sensor, Precision Infrared Radiometer (PIR), Precision Spectral Pyranometer (PSP), Starboard and Portside Radiometers, Air Sampler, Ultra Short BaseLine Underwater Positioning System (USBL), Weather Radar. Voyage-specific measurements: Autonomous Surface Vehicle CO2 sensor (ASVCO2), Deep Towed Camera (DTC). The archive for the IN2021_E03 EOV raw data is curated by the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC) in Hobart, with a permanent archive at the CSIRO Data Access Portal (DAP, https://data.csiro.au/dap/), providing access to voyage participants and processors of the data collected on the voyage. All voyage documentation is available electronically to MNF support via the local network. Access to voyage documentation for non-CSIRO participants can be made via NCMI_DataLibrarians@csiro.au.

This record describes the End of Voyage (EOV) archive from the Marine National Facility (MNF) RV Investigator research voyage IN2019_V02, titled "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania; Subantarctic Biogeochemistry of Carbon and Iron, Southern Ocean Time Series site." The voyage took place from Hobart (TAS) to Hobart between March 14 and April 4, 2019. This voyage consisted of two main projects: SOTS and Subantarctic Biogeochemistry (see formal titles above). For further information please refer to the voyage documentation links below. Instruments used and data collected include: Regular measurements: Acoustic Doppler Current Profiler (ADCP; 75, 150 KHz ), Lowered ADCP (LADCP), Fisheries echosounder (EK60), Multibeam Echosounder (EM710, EM122), Sub-bottom Profiler (SBP120), Gravimeter, GPS Positioning System, Doppler Velocity Log, Temperature, Humidity, Pressure, Wind and Rain sensors, Photosynthetically Active Radiation (PAR) sensor, Precision Infrared Radiometer (PIR), Precision Spectral Pyranometer (PSP), Nephelometer, pCO2, Condensation Particle Counters (CPC), Cloud Condensation Nuclei counter (CCN), Scanning Mobility Particle Sizers (SMPS), Multiangle Absorption Photometer (MAAP), Starboard and Portside Radiometers, Radon, Ozone and Oxygen sensors, Weather Radar, Greenhouse Gas Analysers (Picarro), Infrared Sea Surface Temperature Autonomous Radiometer (ISAR), Fluorometer, Oxygen optode, Thermosalinographs (TSG), CTD, Hydrochemistry. Voyage-specific measurements: Triaxus, ECO Triplet, Fluorescence Induction and Relaxation System (FIRe), Submersible Ultraviolet Nitrate Analyser (SUNA), Fast Repetition Rate Chlorophyll-a Fluorometer (FRRf), Transmissometer (AC9), Trace Metals. The archive for the IN2019_V02 EOV raw data is curated by the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart, with a permanent archive at the CSIRO Data Access Portal (DAP, https://data.csiro.au/dap/), providing access to participants and processors of the data collected in the voyage. All voyage documentation is available electronically to MNF support via the local network. Access to voyage documentation for non-CSIRO participants can be made via DataLibrariansOAMNF@csiro.au.