This record describes the Acoustic Doppler Current Profiler (ADCP) data collected from the Marine National Facility RV Investigator voyage IN2019_V07, titled: "RAN Hydrographic and Maritime Heritage Surveys." The voyage took place from Hobart (TAS) to Hobart between April 11 and April 23, 2019. Data was collected during IN2019_V07 for parts of the voyage; however, gaps in the data occur at times when multibeam surveys were conducted. Data was collected using UHDAS and post-processed using CODAS. Both the RDI Ocean Surveyor 150kHz ADCP and the RDI Ocean Surveyor 75kHz ADCP were run in narrowband. Internal triggering was used. The drop keel was at 2m below the waterline for most of the voyage. See the voyage computing and electronics report for more details regarding data acquisition. This dataset was processed and then archived within the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart.
This record describes Hydrology (HYD) data collected from the Marine National Facility (MNF) RV Investigator voyage IN2019_V07, titled:titled "RAN Hydrographic and Maritime Heritage Surveys. " The voyage took place from Hobart (TAS) to Hobart between April 11 and April 23, 2019. Hydrology samples were collected from Niskin bottles sampled at various depths during Conductivity-Temperature-Depth (CTD) deployments. Parameters analysed were salinity, dissolved oxygen, phosphate, silicate, nitrate plus nitrite and ammonium. This dataset has been archived at the CSIRO O&A Information and Data Centre (IDC) in Hobart. Additional information regarding this dataset is contained in the Voyage Report and Data Processing Report.
This record describes the data (CTD, Dissolved Oxygen, Transmissometer, PAR, ECO Triplet, Nitrate, Fluorescence and LOPC) collected using the towed TRIAXUS platform on Investigator voyage IN2019_V07, titled: "RAN Hydrographic and Maritime Heritage Surveys." The voyage took place between April 11 and April 23, 2019 departing from Hobart (TAS) and arriving in Hobart. Data for 2 Triaxus tows were acquired using Seabird’s Seasave acquisition software using the Seabird SBE911+ CTD 24. O&A Calibration lab supplied calibration factors were used to compute the pressure, preliminary conductivity, oxygen and temperature values. The data was subjected to automated QC to remove spikes and out-of-range values. A Transmissometer and a Cosine Photosynthetically Active Radiation (PAR) sensor were also installed on the auxiliary A/D channels of the CTD. In addition to the auxiliary channels an ECO Triplet and LOPC were mounted on the Triaxus as attached payloads. The standard data product (1 decibar/10 second binned averaged) was produced using data from the primary sensors to produce an along-track time-series dataset for each data recording file. The data from each tow were recorded as a single file. Vertical casts were created with interpolated values from the along-track time-series binned dataset with a maximum interpolation distance of 1 cast. These generated the along-track and vertical cast section data products for each Triaxus tow. Due to a cable failure the PAR and transmissometer data were unusable. The flow meter of the LOPC was suspected to be faulty, compromising the recorded data. The collected data were subsequently archived within the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart. Additional information regarding this dataset may be contained in the Voyage Summary and the Data Processing Report.
This record describes the Conductivity-Temperature-Depth (CTD) data collected from the Marine National Facility RV Investigator voyage IN2019_V07, titled "RAN Hydrographic and Maritime Heritage Surveys." The voyage took place from Hobart (TAS) to Hobart between April 11 and April 23, 2019. Data for 10 deployments were acquired using the Sea-Bird SBE911 CTD 23, fitted with 36 twelve litre bottles on the rosette sampler. Sea-Bird-supplied calibration factors were used to compute the pressures and preliminary conductivity values. CSIRO-supplied calibrations were applied to the temperature data. The data were subjected to automated QC to remove spikes and out-of-range values. Casts 1, 2, and 3 were test casts to verify the recently serviced secondary altimeter data and no bottles were fired during those deployments. A Wetlabs CSTAR Transmissometer, Wetlabs CDOM Fluorometer, and PAR sensor were also installed on the auxiliary A/D channels of the CTD. The collected data were subsequently processed and archived within the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart. Additional information regarding this dataset may be contained in the Voyage Summary and the CTD Data Processing Report.
This record describes the End of Voyage (EOV) archive from the Marine National Facility (MNF) RV Investigator research voyage IN2019_V07, titled "RAN Hydrographic and Maritime Heritage Surveys." The voyage took place from Hobart (TAS) to Hobart between April 11 and April 23, 2019 (AEST). For further information refer to the Voyage documentation links below. Instruments used and data collected include: Regular measurements: Acoustic Doppler Current Profiler (ADCP; 75, 150 KHz ), Fisheries echosounder (EK60), Multibeam Echosounder (EM710, EM122), Sub-bottom Profiler (SBP120), Gravimeter, GPS Positioning System, Doppler Velocity Log, Temperature, Humidity, Pressure, Wind and Rain sensors, Photosynthetically Active Radiation (PAR) sensor, Precision Infrared Radiometer (PIR), Precision Spectral Pyranometer (PSP), Nephelometer, pCO2, Condensation Particle Counters (CPC), Cloud Condensation Nuclei counter (CCN), Scanning Mobility Particle Sizers (SMPS), Multiangle Absorption Photometer (MAAP), Starboard and Portside Radiometers, Radon, Ozone and Oxygen sensors, Weather Radar, Greenhouse Gas Analysers (Picarro), Infrared Sea Surface Temperature Autonomous Radiometer (ISAR), Fluorometer, Oxygen optode, Thermosalinographs (TSG), CTD, Hydrochemistry. Voyage-specific measurements: Bird Observations, Triaxus, ECO Triplet, Ultra Short BaseLine Underwater Positioning System (USBL), Brenke Sled, Sediment Grab, Multi-corer, Video. The archive for the IN2019_V07 EOV raw data is curated by the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC) in Hobart, with a permanent archive at the CSIRO Data Access Portal (DAP, https://data.csiro.au/dap/), providing access to participants and processors of the data collected in the voyage. All voyage documentation is available electronically to MNF support via the local network. Access to voyage documentation for non-CSIRO participants can be made via NCMI_DataLibrarians@csiro.au.